Showing posts with label wall. Show all posts
Showing posts with label wall. Show all posts

Saturday, August 16, 2008

HHO booster parts list

There is nothing more frustrating than trying to get all the parts together that are needed for a project. I have a list of parts that are needed to make a 4"x12", 16 plate HHO booster. Most of these parts can be found at your local hardware store. I have also included sources for some items that may be hard to find.

4-inch diameter PVC pipe 12-inches long 1 Forms the body of the booster
4-inch diameter PVC pipe end-cap 1 Closes the bottom of the booster
4-inch diameter PVC pipe screw cap 1 The top of the booster
Half-inch diameter PVC pipe elbow 1 The gas take-off from the booster
Quarter-inch diameter PVC pipe elbow 2 The water-level indicator connectors
Quarter-inch clear plastic tubing 36 - inch The water-level indicator tubing
Stainless steel switch covers 16 The plate array components
Stainless steel straps 12-inches long 2 The electrical connections to the plates
One-inch diameter PVC pipe 12-inch Available at Home Depot
Quarter-inch stainless steel bolts 1” long 2 Electrical strap connection to the top cap
Quarter-inch stainless steel nuts & washers 2 To fit the steel bolts
Quarter-inch diameter stainless steel nuts 14 To fit nylon threaded rod
Quarter-inch diameter nylon threaded rod 8” min. Nylon Threaded Rod 1/4"-20 Thread.
McMaster Carr Part No 98831A028
Quarter-inch nylon washers 1-pack Nylon 6/6 Flat Washer 1/4" Screw Size,.252"
ID,.472" OD, .054"-.070" Thick, Packs of 100
McMaster Carr Part No 90295A140
Quarter-inch Tube Fitting 90 Degree Elbow 2 Sanitary White PVDF Single-Barbed Tube Fitting
90 Degree Elbow for 1/4" Tube ID X 1/2" NPT
Male Pipe. McMaster Carr Part No 53055K189
Quarter-inch Tube Fitting 90 Degree Elbow 2 Sanitary White PVDF Single-Barbed Tube Fitting
90 Degree Elbow for 1/4" Tube ID X 1/4" NPT
Male Pipe. McMaster Carr Part No 53055K183
One-way valve 2 Diaphragm Check Valve Nylon
Body/Fluorosilicone Diaphragm, 1/4" Barb
McMaster Carr Part No 47245K27
PVC glue 1 tube Same color as the PVC pipe if possible
Optional: Light Emitting Diode 1 10 mm diameter, red, with panel-mounting clip
Quarter-watt resistor 1 470 ohm (code bands: Yellow, Purple, Brown)